I setup OpenVPN connection from one network to another.
The status says “Connected”, but I can’t access the machines on the OpenVPN Server side from the OpenVPN Client side.
Here is my setup, do I need additional static routes ?
Server network (Deco X60):
192.168.4.0 with netmask 255.255.252.0 ( /22) with router at 192.168.4.1
Client network (Deco X50 outdoor):
192.168.0.0 with netmask 255.255.252.0 ( /22) with router at 192.168.1.1 (right, not 0.1)
On the Client side, I used “Access Permissions” and listed several clients, so it’s not a free for all.
The OpenVPN tunnel has 10.8.0.1 on the server side and 10.8.0.2 on the client side.
One of the clients allowed is my phone. When I am connected to the Client networks WiFi, I try to traceroute to the 192.168.4.222 server on the Server network. But, the trace seems to be going off into the general internet, instead of what I would expect. This is the guess of what I should see:
I am a total VPN noob, so please feel free to explain the basics.
Thanks!